Nous vous accompagnons dans le TEMPS!!
Distributeur de solutions...
Les produits :
Condenseur:
Turbo J Condensers
From Thermokey’s R&D experience “Turbo-J”, an innovative series of double coil condensers, has come into being. This new series is capable of fully satisfying the needs of industrial refrigeration and air - conditioning operators. 
 
The new Turbo-J series has been designed, in order to be used with all environment-friendly refrigerants. The capacities of this series range from 100 kW to 1915 kW measured at nominal conditions (ENV 327 Norm). 
 
The extraordinary performance of these condensers is the result of an optimal combination of new high-efficiency aluminium fins, 3/8” copper tubes with a special inner corrugation and new fans which can develop high air flow with reduced current absorption and low sound emissions. 
 
The Turbo-J series is based on a modular design with a RAL 7035 oven painted galvanized steel housing and can use up to sixteen 900 mm fans with 8 sound power levels, with a single or double fan row. 
 
The following customizations are available upon request: 
 
- Speed controllers with phase cut, voltage step or inverter technology. 
 
- Wirings and junction boxes can be standard or fitted according to specific requests. 
 
- Special materials for all types of applications and installation environments. 
 
An innovative “adiabatic” system AFS (Air Fresh System) is also available on request: this automatic system, developed by Thermokey, enables the heat exchanger to keep the same performance level even when the air temperature is higher than the design conditions.
Turbo line Condensers
From Thermokey’s R&D experience “Turbo-J”, an innovative series of double coil condensers, has come into being. This new series is capable of fully satisfying the needs of industrial refrigeration and air - conditioning operators. 
 
The new Turbo-J series has been designed, in order to be used with all environment-friendly refrigerants. The capacities of this series range from 100 kW to 1915 kW measured at nominal conditions (ENV 327 Norm). 
 
The extraordinary performance of these condensers is the result of an optimal combination of new high-efficiency aluminium fins, 3/8” copper tubes with a special inner corrugation and new fans which can develop high air flow with reduced current absorption and low sound emissions. 
 
The Turbo-J series is based on a modular design with a RAL 7035 oven painted galvanized steel housing and can use up to sixteen 900 mm fans with 8 sound power levels, with a single or double fan row. 
 
The following customizations are available upon request: 
 
- Speed controllers with phase cut, voltage step or inverter technology. 
 
- Wirings and junction boxes can be standard or fitted according to specific requests. 
 
- Special materials for all types of applications and installation environments. 
 
An innovative “adiabatic” system AFS (Air Fresh System) is also available on request: this automatic system, developed by Thermokey, enables the heat exchanger to keep the same performance level even when the air temperature is higher than the design conditions.
Microchannel Condensers
THERMOKEY, leader in the production of heat exchangers, presents a series of new air-cooled condensers with an innovative microchannel heat exchanger. 
The M3C series by Thermokey, built entirely in aluminium, sets new construction and performance standards.
Thermokey anticipated well in advance the time acknowledging the market needs to adopt more innovative high performance heat exchangers and is now ready to provide a full range of new generation air-cooled condensers with microchannel technology, designed specifcally for the HVAC & R. With the help of sophisticated software for analysis of fuid fow characteristics, Thermokey has developed a range of all-aluminium condensers with microchannel coil, innovative in the type of fns and headers, characterized by a section of aluminium tube of 32 mm and an increased pipe thickness. 
The refrigerant inlet and outlet connections are still in copper to facilitate the connection of the condenser to the refrigeration system and copper-aluminium joints are protected by shrink wrap. The reliability, corrosion resistance, reduction of refrigerant charge, low air side pressure drop, modular design, easy maintenance and cleaning, together with the compactness, and the lightweight, allow the reduction of overall costs with more than 90% recyclability. Moreover, at the same power with conventional models, the “footprint” is smaller, the necessary air fow is lower and therefore the electrical power consumption is signifcantly reduced. 
The M3C condensers are designed to work with most common refrigerants such as R404A, R507A, R134A, R410A, R290, ..., R717. They can operate with a maximum working pressure of 45 bars, and are tested in the helium room up to 50 bar in accordance with CE 97/23 norm.